Advanced Hydraulic Training System
Stok | Tersedia |
Kategori | MEKATRONIKA, SEMUA PRODUK, TEKNIK ALAT BERAT |
![](https://jualalatpendidikan.com/wp-content/uploads/2021/03/Advanced-Hydraulic-Training-System.jpg)
Pemesanan dapat langsung menghubungi kontak dibawah:
– Trolley (Aluminum Channel) with frame & caster wheels with Brake (Loadcapacity: 400 Kg) – Hydraulic tank with 30 Litre capacity, Oil cleanliness: Level 8 (With suction filter and return line filter) – Variable Frequency Drive for studying pump characteristics – Three Phase flange mounted electric motor 2 HP -1500 rpm – Pressure Gauge 0 to 100 Bar. Glycerin filled – Push to read Pressure Gauge Isolator – Gear Pump (Flow Rate: 8 LPM, Max Pressure: 70 Bar) – Vane Pump (Flow Rate: 6 LPM, Max Pressure: 140 Bar) – Hydraulic Motor Bidirectional . Pressure Relief Valve (Direct operated relief valve) Flow Control Valve (Non Pressure Compensated) with Check Valve Flow Control Valve (Pressure Compensated) with Check Valve Pressure Sequence Valve Pressure Reducing Valve Four way Two position manually operated direction control valve Four way Three position manually operated direction control valve Four way Three position manually operated direction control valve Single Acting Cylinder (Stroke: 100mm, Dia: 25mm, Test Pressure: 70 Bar) Double Acting Cylinder (Stroke: 200 mm minimum Test Pressure 130 Bar) Check Valve Direct Operated Single Pilot Operated Check Valve Needle Valve Pressure Switch Four Way Three Position Double solenoid operated direction control valve Four Way Two Position Single solenoid operated direction control valve Proximity Sensors (Test Voltage 30 V DC max) Electrical control panel with all safety precautions and 230 Volts short circuit protection safety as per DIN standard DC Power supply with modulator and rectifier PLC with 18 Input and 12 Output with Modbus communication and PLC Ladder download facility Intel Mother board Computer with 21 inch LED Monitor with Bluetooth keyboard and mouse Automgen – Hydraulic Circuit Simulation Software with Dynamic PLC Ladder updation facility Complete trainer kit can be operated directly from software Automgen – Hydraulic Circuit Simulation Software |
Berat | 100000 gram |
Kondisi | Baru |
Dilihat | 221 kali |
Diskusi | Belum ada komentar |
![](https://jualalatpendidikan.com/wp-content/uploads/2021/03/Modular-Product-System-Distributing-station-Package.jpg)
![](https://jualalatpendidikan.com/wp-content/uploads/2021/03/Modular-Product-System-Distributing-station-Package.jpg)
Pemesanan dapat langsung menghubungi kontak dibawah:
Modular Product System Distributing station Package
Model : MMS01 Size(in cm) : 54x70x134 Installation : Vertical Ambient temperature : 60°C Max. Medium : Filtered Compressed air Operating Pressure range (Bar) : 6-8 bar Operating Voltage +/- 10% : 230V AC, 50HZ Power consumption : 180 W (224 VA) Sensors and actuator operating : 24V, DC voltage Material of construction : Aluminum,…
*Harga Hubungi CS![](https://jualalatpendidikan.com/wp-content/uploads/2021/02/Temperature-flow-pressure-and-level-sensor-applications-340x340.jpg)
![](https://jualalatpendidikan.com/wp-content/uploads/2021/02/Temperature-flow-pressure-and-level-sensor-applications-340x340.jpg)
Pemesanan dapat langsung menghubungi kontak dibawah:
Temperature, flow, pressure and level sensor applications
The elements included in the “FLPTU” unit are: Water Supply Unit. Module designed to pump water to the other devices of the application. The elements included in the module are: Water pump, with 20 l/min of maximum flow. Plastic tank, with 30 litres of capacity. Hot Water Pumping Unit. Water pumping unit designed for…
*Harga Hubungi CS![](https://jualalatpendidikan.com/wp-content/uploads/2021/02/Modul-Praktik-Robot-Industri-Sistem-Kontrol-Aplikasi-Mobile-Robot-2-340x340.jpg)
![](https://jualalatpendidikan.com/wp-content/uploads/2021/02/Modul-Praktik-Robot-Industri-Sistem-Kontrol-Aplikasi-Mobile-Robot-2-340x340.jpg)
Pemesanan dapat langsung menghubungi kontak dibawah:
Modul Praktik Robot Industri ( Sistem Kontrol Aplikasi Mobile Robot )
Technical Data Universal Robots UR3e Working radius: 500mm Max. load capacity: 3kg Degrees of freedom: 6 rotating joints Repeat accuracy: +/- 0,03mm Controller Digital inputs: 16 Controller Digital outputs: 16 Controller Analog inputs: 2 Controller Analog outputs: 2 Tool Digital inputs: 2 Tool Digital outputs: 2 Communication: TCP/IP, Modbus TCP, Profinet, Ethernet IP Collaborative…
*Harga Hubungi CSVacuum Cleaner (D)
Detail produk dan spesifikasi Frequency 50 Hz Dust Capacity 18 Ltr Water tank capacity 10 Ltr Vacuum 18 kpa Noise 77 dB Weight 6.1/6.9 kg Accesories Brush Sponge Filter 3 parts plastic tube Crevize noozle 1.5 meter hose Dust bag
Rp 20.055.000Rak Linen
Deskripsi Rak susun 5//Rak susun laundry//Rak besi kuat Abu Abu Spesifikasi Bahan Plat hambalan dengan ketebalan 0.7 mm 1 tulangan dibagian tenggah sebagai penambahan kekuatan Besi suku lubang dengan ketebalan 2 mm Cat powder coating Ukuran L40 P100 T200
*Harga Hubungi CSWashing Machine
AQUA Mesin Cuci Front Load Series 10,5 Kg (Model FQD-105728QD) dengan teknologi DD Inverter Motor dapat menghemat listrik hingga 30 persen dilengkapi dengan Teknologi Drying Sensor yang mampu mengeringkan 100 persen
Rp 11.730.000
Belum ada komentar, buka diskusi dengan komentar Anda.